Jump to content


Adjusting Draw Length On Mathews Fx

  • Please log in to reply
2 replies to this topic

#1 michael82



  • Members
  • Pip
  • 1 posts

Posted 06 February 2012 - 02:05 PM

Ok I have a 2002 mathews fx solo cam compound bow ,my draw length on the bow is set to 30" I need it to be 29" .I dont know what number I need to go to .There is a 1,2,3 under each pin If I put the loop on a smaller number is that going to make my draw length shorter or longer.It is on the #1 right now and I measured it and it is at 30. So do I go to the #3 to make it 29"??

#2 Jeremiah


    Hunting Resource

  • Owner/Admin
  • 3,087 posts
  • Gender:Male
  • Location:Western Pennsylvania
  • Interests:God, Family, Hunting, Archery, Outdoors, Computers, Website Development...

Posted 06 February 2012 - 02:45 PM

Moving the string to peg #3 on both sides of the cam will shorten the draw length by one inch from where it is now.

PA IHEA & NBEF/IBEP Instructor


#3 keykeeper



  • Members
  • Pip
  • 3 posts

Posted 11 November 2012 - 09:17 PM

hello, have a similar question.... got an opportunity to pick up a used martin compound bow...model a lynx. it has an adjustable draw weight of 55-70 lbs. the current draw length is 31 inches .... i use a 27 inch draw....can this be adjusted down before i spend the money on it...and find out i can't use it? thanks for any and help/info.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users